Always use safety precautions in the work place. This tool is a manual tool, so caution must still be taken when opening or closing doors.
The intention of this tool is mainly to provide leverage and to prevent unconventional methods of opening/closing container doors which often result in strains and sprains. Using product other than it’s intended function may result in injury.
Use optional provided lanyard and attach to OPNBar hook ring. Secure lanyard around wrist as an added measure to prevent tool from slipping from hand.
The right hand door is the first door you open, swivel the custom catches up, there’s one on each handle.
You’ll notice that your container is fitted with lock rods which run all the way from the bottom of the doors through to the top. At each end of the lock rod is a cam and a keeper which engage to allow the door to lock.
Slide the OPNBar (hook side) over the door handle and grip the extended leverage handle with both hands.
When using leverage bar, make sure the rectangular mouth of the bar is snug on the container door handle. For best results firmly insert OPNBar and apply forward pressure when operating. OPNBar should be tight and should not wobble. Failure to do so can result in the tool, or the operator to slip resulting in injury. The tool must be operated by using 2 hands with a firm grip at all times to reduce the risk of injury; when using the tool the operator must have both feet planted firmly on the ground while wearing dry work gloves with the safety strap so the tool will not slip out of one’s hand.
Lift up the door handles while gripping OPNBar and twist slightly to make sure the cams and keepers are dis-engaged.
Next take hold of the inner door handle first and pull out slightly followed by the outer handle and then pull them in tandem.
Closing the doors is just a reverse process of course, start with the left hand door, engage the cams and keepers and then twist both door handles. Slide the OPNBar (hook side) over the door handle to provide leverage.
When using leverage bar, make sure the rectangular mouth of the bar is snug on the container door handle. For best result we recommend firmly inserting opnbar and applying forward pressure when operating. Bar should be tight and should not wobble. Failure to do so can result in the tool, or the operator to slip resulting in injury. It is recommended that the tool be operated by using two hands with a firm grip at all times to reduce the risk of potential injury.
Finally swivel the custom down.
5th wheel release hook
Operator must have a good leverage grip and should make sure hook is snug on the 5th wheel release hook. Use two hands, firmly gripping the hook from handle to the angled section of the tool to ensure that the OPNBar hook is secure and pressed against the 5th wheel release hook securely. Failing to do so could cause the operator to fly back and result in injury.
The fifth wheel coupling provides the link between a semi-trailer and the towing truck, tractor unit, leading trailer or dolly. Some recreational vehicles use a fifth wheel configuration, requiring the coupling to be installed in the bed of a pickup truck as a towing vehicle.
Using a strong 5th wheel pull hook is recommended when separating a tractor from the trailer. Soft-metal hooks (such as those made from aluminum) are unsafe as they are too susceptible to bending.
Reaching under the trailer to release the fifth wheel can cause neck, shoulder and back injury, as well as, damaging your clothes with grease, oil, and road grime. Our 5th Wheel Release Hook can help eliminate these problems.
When using a hook to pull a fifth-wheel release, get a wide foot stance, with your rear foot parallel with the trailer. Such a stance will help you maintain your stability if the hook slips off of the fifth-wheel release handle.
While tire thumping is a quick way to check for flat tires, you must always check with a tire gauge if you suspect that a tire is low on air. The apparatus must be used as a tool to detect changes in sound when thumping tires to quickly point out if there is an issue with a tire.
A quick and easy way to check tire pressure is by thumping your tires. Some trucks have many tires and tire thumping is the fastest method for checking tire pressure before hitting the road.
Since duel tires ride side by side, one tire can be flat and still on the wheel or rim and will not appear flat since the tire right next to it will hold it off the ground.
Tire Thumper assists the truck driver and operator in a quick method of evaluating properly inflated tires.
If there is air in the tire, the tire thumper will bounce easily and make a loud, sharp thud; and if the tire is flat (no air) it will not bounce much and will give a sound like a dull thud when it is smacked.
This product should be stowed in a secure area, away from children and should not be exposed to excess heat or frigidity which may affect the durability of the product.
When using the tool the operator must have both feet firmly planted on a level surface at all times.
We recommend that before the tool is used, the operator wears clean, dry, “work gloves” free of any dirt or grease or any other substance to avoid slippage from the operator’s hands.
When not is use, product must be stowed away in a secure area
Avoid exposing the tool to heat or frigid conditions for long periods of time as this may affect the durability of the product when in use
Ensure tools properly seated before use to avoid injury
Safety strap can be used reduce the likelihood of tool slipping out of hand